What's In Your Water? How To Tell If You Need A Home Water Treatment System

Posted on

When it comes to the water you drink, you want to make sure that it's free from contaminants. If you're drinking bottled water, or using a personal filtration device for your water, you're taking the necessary precautions to avoid contaminated water. However, bottled water and personal filtration devices do nothing to protect the water that you're using in your home. Unfortunately, that means you could still be using water that's loaded with harsh contaminants such as arsenic, aluminum, and barium. The only sure way to get those out of your water is with a whole-house water treatment system. If you're not sure you need that, there are some simple steps you can take to find out. Here are three places you should look to see if you would benefit from water treatment.

Read the Fine Print

If you're trying to decide whether you'd benefit from a whole-house water treatment system, the first thing you should do is read the fine print. You might not realize this, but your water company will provide you with an annual report regarding the safety of the water you're drinking. That report will give you a detailed list of everything that was found in the water during testing. If you haven't received a report, you should contact your water company and request one. Once you read the report, you'll see all the harmful ingredients that have been coming into your home. You might not be drinking it, but you're still cooking with it, bathing in it, and doing your laundry with it.

Check Your Bathtub

If you've got poor water quality in your home, you're going to be able to see it in your bathtub and feel it on your skin. After your bath, take a look inside your bathtub. If you've got a thick, dirty soap scum ring around the tub, you've got bad water. Now, run your finger along your skin. If your finger gets stuck on your skin, or you see white film rub off your skin, you need to have a whole-house water treatment system installed in your home. That residue is caused by poor water quality.

Look at Your Faucets

If you've got hard water in your home, it's going to start ruining your plumbing. You might not be able to see your underground water pipes, but you'll still be able to see the damage that's being done. You'll just need to look at your faucets. If you can see white, flaky deposits on your faucets, especially in your bathroom, your plumbing is being ruined by hard water.

Don't let poor quality water ruin your plumbing, or leave a sticky residue on your skin. Treat the water in your home and avoid the problem altogether. Visit sites such as http://www.waterman911.com for more information. 


Share