Modernize Your Warehouse With Storage And Preparation - Understanding The Pallet Rack Permit Process

Posted on

Cleaning up the floor of your warehouse means creating an efficient system that's designed to maximize work flow. Taking steps to remove piles of pallets which may have built up is one great way to achieve that goal, and a pallet rack can be an important part of that process. However, it's often not as simple as picking out the rack you want and moving ahead with installation.

Below, you'll find a guide to some of the steps in the pallet rack installation process. While it can be frustrating to have to jump through hoops just to control your operation, the end result should be satisfying enough to make the red tape seem like a minor nuisance.

Rack Selection

First and foremost, it's vital that you select the rack which best serves your needs. Many companies use only one standard size pallet, and if that applies to you, then it's simply a matter of choosing a rack of the appropriate size to handle your daily usage volume.

However, if your products demand the use of specialized or irregular pallets, you may need to order a rack dedicated to handling that challenge. While those products do exist on the market, you should work closely with a rack vendor like Certified Handling Systems and make sure he or she has a thorough understanding of your usage and what needs to be done to secure it.

Fire Inspection

Worker safety needs to be a paramount concern of any management official. Pallet racks do take up space on a work floor, and it can be a challenge to install them in an area where they don't impede the flow of foot traffic during an emergency evacuation.

Your fire inspection will be used to make sure that you've maintained suitable exits which still allow for an easy escape in the worst case scenario. They'll also make sure the rack isn't too close to an ignition source, as a stack of pallets can pose a fire hazard of their own volition.

Building Inspection

As with the fire inspection, a building inspector has to be involved in order to further guarantee worker safety. Certain height regulations must be observed in order to eliminate the risk of toppling. There may also be concerns about structural integrity if your facility is composed of corrugated metal or is otherwise designed as a temporary facility. Making sure to be completely open and honest with your building inspector is a necessary step in making sure you can upgrade with minimal stress.


Share